T3iu Forensic SATA Imaging Bay


T3iu Forensic SATA Imaging Bay.



T3iu Forensic SATA Imaging Bay

The Tableau T3iu Forensic SATA Imaging Bay is built for extremely fast write-blocked acquisitions of of 3.5″ and 2.5″ SATA hard drives. T3iu was designed for easy integration into new or existing workstations using a single SuperSpeed USB 3.0 host connection.

The data transfer bandwidth offered by USB 3.0 provides system integrators the opportunity to scale SATA imaging capability of workstations by adding multiple T3iu units. Whether used by itself or in combination with the Tableau T35689iu Forensic Combination Bridge, the T3iu is a cost effective way to eliminate your SATA imaging backlog.

The T3iu package, which fits in one 5.25″ half-height drive bay, is three forensic products in one: a high-performance SATA write blocker, a suspect drive cooler, and a suspect drive tray. Unique to the T3iu is a hard drive receptacle which eliminates the need for drive signal cables. Changing suspect drives is more efficient due in part to the enhanced hot-swap capability of USB 3.0. No other SATA write blocker on the market today can match the performance and user convenience of the Tableau T3iu.

As with all other Tableau products, firmware updates are easy to apply using the Tableau Firmware Update utility, which has been rewritten to support product firmware updates via USB. The T3iu incorporates the exclusive Tableau “U” update button for secure and reliable management of product firmware updates.

Additional information

Weight 2 lbs
Dimensions 8 x 7 x 3 in

Tech Specs

Connectors: Host Side (Rear)
  • (1) USB 3.0 Type B
  • (1) 15-Pin Male SATA Power Connector
  • Connectors: Device/Write-Blocked (Front)
  • (1) SATA 2.5" Slot With Unified Connector
  • (1) SATA 3.5" Slot With Unified Connector
  • Switches: Power
  • Controls Power For SATA Drives Inserted In Drive Bay
  • Switches: 'U' (Update)
  • Used To Set T3iu In Firmware Update Mode
  • Switches: DIP Switch
  • 4-Position DIP Switch Configures User-Selectable Options
  • Status LEDs
  • (5) LEDs:
  • Power ON
  • Device Detected
  • Host Connected
  • Write-Block Enabled
  • Drive Activity
  • Factory Configuration
  • Read Only
  • Compatibility: SATA Devices
  • SATA 2.5", 3.5" Or SSD Devices That Conform To Standard Dimensions
  • Compatibility: Host Interface
  • USB 3.0
  • Note: For The Best USB 3.0 Performance, Ensure The Host Controller Driver And BIOS Update Are Applied
  • Compatibility: Host O/S
  • Windows XP/Vista/7/8/Newer
  • Macintosh OS X
  • Most Linux Distributions
  • Power
  • 2.5W Typical Operating (Not Including Hard Disk
  • Supply Voltage (DC IN A/B)
  • +5VDC @ 1.5A, +12VDC @ 1A (Includes Budget For Hard Disk)
  • Dimensions
  • 6.25" x 5.75" x 1.65"
  • Weight
  • 1.50lbs (24oz)(680g)
  • Operating Temperature Range
  • 0 To 55 Degrees C (No Airflow)
  • Storage Temperature Range
  • -40 To 70 Degrees C
  • Relative Humidity
  • Up To 90% (Non-Condensing)
  • Reviews

    There are no reviews yet.

    Be the first to review “T3iu Forensic SATA Imaging Bay”

    Your email address will not be published. Required fields are marked *