Analysis Station

USB 2.0 & FireWire (IEEE 1394a) to ATA storage Enclosure with Mobile Rack

The USB interface of UF2IDE525MR-A1 supports USB 1.1 or USB 2.0 specifications to allow connections to host computer via USB port at maximum data transfer rate 480 Mbps.

The 1394 interface of the UF2IDE525MR-A1 is in compliant with IEEE Std 1394-1995 and IEEE P1394a specification supporting data transfer rate 100, 200 and 400 Mbps, and built-in SBP2 (Serial Bus Protocol 2) hardware engine to enhance sustained data transfer rate up to 40 MBytes/sec.

UF2IDE525MR-A1 Write Protected Analysis Station

It allows ATA/SATA storage devices to connect to a 1394 serial bus or USB serial bus in a plug-and-play fashion.

UF2IDE525MR-A1 provides the perfect solution for data backup and transfering of data between computers using ATA/Serial ATA HDD

Max. HDD Bay / Type      One 3.5" or 2.5” ATA/SATA HDD
Max. Storage Capacity     Supports Hard drives of up to 2048GB (2TeraBytes).
IDE Hard Disk Drives/ Removable IDE Hard Disk Drives    

* AT Attachment with Packet Interface Extension (ATA/ATAPI-6) Compliant: ATA interface support
o PIO mode 0~4
o Multiword DMA mode 0~2
o Ultra-DMA mode 0~4
o Supports 48-bit addressing for large hard drives (>128GB)
* IDE(ATA)Interface: IDC 20x2 Male Connector

USB Feature    

* USB 2.0 interface: One USB B-type connector
* USB bus transfer rate: high speed (480 Mbit) or full speed (12 Mbit)
* USB-IF Hi-Speed Logo Certified (TID No. 40002614)

1394 Feature    

* 1394a PHY: Ti's TSB41AB2
* 1394 Bus Transfer Rate: 100/200/400 Mbps
* Built-in hardware automated SBP2 protocol engine for 1394 connection which includes:
o Management ORB fetch engine
o Command ORB fetch engine
o Page table fetch engine
o Response packet generate engine
* FireWire (IEEE 1394a):FireWire-6pin x 2pcs
* FireWire 1394 Compliant Logo (TA ID #200404004)

Power Supply    

* Input: Changeable AC power cord.
* Auto-switching 90 ~ 260V AC to +12VDC/3A Power Adapter.
o Input: 90 ~ 260VAC, 50 ~ 60HZ, 1.2A (Max)
o Output: +12VDC, 3A (Max)
* Output: Standard Walkman-type 2.0 mm DC power plug.

ATA Mobile Rack    

* The inner HDD tray provide the screw hole for 3.5" SATA/ATA HDD.
* The inner HDD tray and mounting frame were made by aluminum which is good for heat dissipation.
* Ejecting pull handle with miniature keylock.
* Keylock (with power switch control)
* Lock and unlock the HDD mobile tray
* Make HDD mobile tray hot-swapable
* Power indicator LED & HDD Access LED are provided
* Built-in 40x40 mm cooling fan
* Provide three kinds of tray for option:
o 3.5" ATA HDD Mobile Tray
o 2.5" ATA HDD Mobile Tray
o 3.5"/2.5" Serial ATA HDD Mobile Tray

Hardware Requirements

* Desktop PC: with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to PCI Host Adapter equipped with a external USB port.
* Laptop PC: with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to CardBus PC Card equipped with a external USB port.
* Desktop PC: with either a built-in Firewire (IEEE 1394) port or a Firewire (IEEE 1394) to PCI Host Adapter.
* Notebook PC: with either a built-in Firewire (IEEE 1394) port or a Firewire (IEEE 1394) to CardBus PC Card.

Operating System Support

* Windows 98SE/ME/2000/XP/2003/Vista; MacOS 9.1 or higher; Linux
* Driver Requirements
o FireWire:
+ No driver installation for Windows 98SE, ME, 2000, XP, 2003, Vista, Mac OS and Linux
o USB:
+ No driver installation for Windows ME, 2000, XP, 2003, Vista, Mac OS and Linux.
+ Driver available for Window 98 SE

Kit includes

* UF2IDE525MR-A1 Enclosure.
* CB-00136: USB 2.0 A to B type Cable in length of 1.5m
* CB-00055: FireWire 6 pin to 6 pin Cable in length of 1.5m
* AC to +12VDC/3A Power Adapter
* Screws for 3.5" HDD.
* Two Keys.
* Installation Guide.

Customer Reviews: